Handgun Red Dot

RD3-002(2 MOA) red dot. Originally came out when we were doing private label for name brands years ago. It has a built-in/non removeable picatinny base that only fits picatinny rail. It can not attach to handgun plates.

 

RD3-006 Haracan( 4MOA GREEN Dot) Introduced in 2015, Power switch is at front. Battery compartment is at the bottom. It fits the Doctor/Vortex Venom footprint/cut/screw pattern.

 

RD3-009 Crusader (5MOA RED Dot) Introduced in 2016. Power switch on the side. Battery compartment is at the bottom. It is waterproof too. It fits the Doctor/Vortex Venom footprint/cut/screw pattern.

 

RD3-012 Delta (6MOA RED Dot or GREEN Dot) Introduced in 2019. It has top battery loading; therefore you do not need to remove the sight from the pistol to re-zero. Two power switches with one Up and one Down. It also has a GREEN dot version called RD3-012G. It fit Doctor/Vortex Venom footprint/cut/screw pattern.

 

RD3-013 Bertrillium (4 MOA RED Dot) Introduced in 2019. It has top battery loading, therefore you do not need to remove the sight from the pistol to re-zero. It also has low battery consumption technology that the battery last up to 3000 hours on the brightest setting and 30000 hours on the lowest setting. It fit Doctor/Vortex Venom footprint/cut/screw pattern.

 

RD3-015 Zantitium (4 MOA RED Dot) Introduced in 2019. It has top battery loading; therefore you do not need to remove the sight from the pistol to re-zero. It also has low battery consumption technology that the battery last up to 3000 hours on the brightest setting and 30000 hours on the lowest setting. Two power switches with one Up and one Down. The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optic Ready handgun model that will keep the rear sight to co-witness the red dot, such as Glock Mos. The size of this red dot does not sit in to the pre-cut. It only fits the mounting plate replace the rear sight on the top of slide(not in the pre-cut). It fit Doctor/Vortex Venom footprint /screw pattern.

 

RD3-011  (5MOA RED Dot) Introduced in 2016. It is about 30% longer than other red dot, the window is also bigger. Unlike other Ade RD3 models, RD3-011 has the same screw pattern/footprint as trijicon rmr. This sight does not fits (sit inside the grove/cut)  the slide that is custom milled for trijicon rmr because it is longer than rmr in size. It only fits mounting plate that replace the rear sight, or the plate set above the slide for trijicon rmr footprint/screw pattern.

rd3-018 SPIKE(4 MOA Red Dot) Designed to fit Canik Elite TP9 SC,  Sig 365XL, Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, Walther PPS M2 Optics Ready or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.

 

Upcoming in summer 2020.

Model Stingray  It fit RMR footprint/screw pattern